Since 2018, Top Coat Painting has proved professional exterior services in the local and surrounding area.
The last few years we have focused just not only perfecting our trade, but also perfecting our process and systems to make your experience with us flawless. Don't just take is it from us, look at our Reviews from past customers. Other painters paint your house and you never hear from them again. Top Coat Painting will make sure that we are there for you in the future. We got you covered!
-Wash: We begin by power washing your house or structure with a high-pressure power washer. We also use Simple Green House and Siding Cleaner to remove dirt, stains, mildew, algae and any oxidizing. Scrub as needed.
-Prep: Top Coat Painting will then wait for the house to dry. (normally 24-48 hours after power washing) We do all scraping and sanding of flaking, chipping, or peeling paint then prime all bare wood surfaces. Blistering siding will be brushed and back rolled at this time to help seal and hide for final coat appearance. Back rolling is not done at the time of spray application to ensure the proper texture of applied paint. Not all blistering will be completely concealed upon completion.
Top Coat Painting then caulks the entire house at this time. We use a 45-55 year caulk and seals all soffit vents, vinyl windows, caulk the backs of highly visible lower fascia and soffit, and caulk all corner boards, door jambs, cracks and any other places to make the final paint job look clean and neat.
-Paint: After the house has had the proper time to dry, we will begin painting your home. Top Coat Painting applies all paints according to manufacturer specifications to ensure proper warranty. Proper warranty includes applying the paint at a proper mil thickness wet or dry. Two coats will not add to or take away from the warranty. We apply all paint in a two-coat process to thickness specifications. If necessary, we add more coats for coverage or hiding at our discretion.
All trim, window trim, corner boards, side batting, fascia, and door jambs are brushed and rolled with two coats of paint where appropriate. Gutters are primed and painted using an airless sprayer and fine finish tip. The body of your structure is painted using an airless sprayer and applying the paint at the proper thickness and overlapping by 50% one time to ensure coverage and warranty. All primed and blistered areas are back rolled prior to spraying giving them 3 layers of paint.
-Clean: Top Coat Painting will try to clean the job site cleaner than when we arrived. This includes picking up all trash, cleaning all walkways, driveways, porches, etc. Top Coat Painting attempts to remove all paint chips caused by any sanding and scraping but due to the nature of the small chips, not all paint chips can be removed.
-Touch up Kit: A touch-up kit that includes a leftover gallon of each product used is left in a labeled box for your convenience. Each gallon is labeled with the color name or number, type of product, sheen, and where it is located on the job.
1/10